using sepereate mixes in saffire mixcontrol with pt11

#USING SEPEREATE MIXES IN SAFFIRE MIXCONTROL WITH PT11 HOW TO#
#USING SEPEREATE MIXES IN SAFFIRE MIXCONTROL WITH PT11 PRO#

The example at the top of this article shows Mixes 1 and 2 aggregated together.

The mixes combine in the following way: Mix 1 with Mix 2 and vice versa, Mix 3 and 4, Mix 5 and 6, etc. The quantitative data showed little evidence of significant differences of a size that would be of practical or clinical interest, suggesting that the intervention had no impact on these outcome measures. However, the stereo button on the mix output aggregates that mix with the one next to it, and the mix tab at the top of the screen expands. Separate analysis of the quantitative and qualitative data revealed discrepant findings. a Channel Fader, and Mute, Solo, and Stereo buttons.

The controls are essentially the same as those found in the mixer channels, i.e. The audio from the separate mix channels then goes to the mix output, which is situated at the right-hand end of the mixer section. It is also possible to name the channel by clicking in the box below the Mute and Solo buttons.

Stereo – Aggregates the 2 mono channels together into a single stereo channel with shared controls.

Preview the selected channel before the level is altered by the channel fader.

Channel Fader – adjusts the level of the channel.

Pan – adjusts the balance between left and right speakers.

The inputs selected will be the same in each of the mixes, however, the other controls are specific to each mix. Inputs are all of the audio inputs on your interface (both analogue and digital), and DAW contains all of the audio channels being sent back to your interface from your computer (Digital Audio Workstation). The possible inputs are divided into streams grouped by source, as shown in the drop-down menu above. This is done by clicking in the box above the pan control in the channel, as shown below. The first thing that you need to do is to select an input for the channel. Let’s start by focussing on a pair of channels in the mix window:

#USING SEPEREATE MIXES IN SAFFIRE MIXCONTROL WITH PT11 PRO#

With the PRO 24 and PRO 24 DSP, this number is halved. When used with the PRO 40 and the Liquid Saffire 56 (pictured above), Saffire MixControl contains up to 16 mono or 8 stereo mixes. It is worth noting, however, that this section of the MixControl software has no effect on the signal being passed into your computer.

#USING SEPEREATE MIXES IN SAFFIRE MIXCONTROL WITH PT11 HOW TO#

The first section of this MixControl tutorial is going to focus on the top half of the control panel (shown below), and how to use it to create custom mixes that can be routed to any of the outputs on your interface. Applies to: Saffire Range and 1st Generation Scarlett 6i6, 8i6, 18i6, 18i8 and 18i20

Using sepereate mixes in saffire mixcontrol with pt11